Godiag BMW CAS4 / CAS4+ Test Platform is specially designed for BMW locksmiths, maintenance engineers and CAS4 / CAS4+ programming engineers. It’s easy to use no need PCB. It works together with Godiag GT100, CGDI, Xhorse VVDI 2, BMW VVDI BIM Tool, Autel IM608, Yanhua ACDP, Tango etc for BMW CAS car model from 2000- 2014 year. It also has been confirmed that it can delete BMW key with Xtool A80 Pro.
Check the test as below.
Devices required:
Xtool A80 Pro all system diagnosis tool
Godiag CAS4 CAS4+ Test Platform
2016 BMW CAS4 module
BMW key
The operation process:
Connect Godiag CAS4 test platform and BMW CAS4 module
Connect Godiag CAS4 test platform and Xtool A80 Pro by GODIAG OBD2 to OBD25 Cable
Tap BMW newest software version>> Immobilizer>> Manual select>> CAS4/CAS4+>> Delete key
It requires network connection for delete key function. Make sure the network connection is normal before operation.
Tap ‘Yes’ to continue
Turn on the ignition switch and hazard warning lights
Reading key data, keep patient…
Read out the vehicle info, confirm it and continue
Select one used key position (e.g. key pos2) to delete
Place the original car key chip close to the car key induction area
A chip has been detected, do not move chip or key during pre-coding or programming
Successful detection
Note: other keys are unrecognized, please put other keys into the key induction area, press the unlock and lock keys to activate the keys respectively.
Finish!
Back to delete key function and read key info again, now the key pos2 is unused.
Alright! It’s easy and fast to delete the BMW CAS4/CAS4+ key by Xtool A80 and Godiag BMW CAS4/CAS4+ Programming Test platform.
Attach the related video guide: