GODIAG ECU GPT Boot AD ECU Connector can be used for ECU PINOUTs of different manufacturers and brands according to the wiring definition. It’s equipped with BOOT resistance board connecting cable [anti-lost resistor design], and supports ECU reading and writing via OBD2 Bench or GPT Bench (without disassembling the ECU) or Boot mode with disassembling the ECU. Check the methods to get the related ECU PINOUT connection diagrams.
Free download ECU OBD2 GPT Boot Pinout.zip directly
For different ECU products PINOUT, visit different websites.
1.For the wiring diagram using PCMFLASH PINOUT, please refer to https://pcmflash.ru/downloads/english.html
2.DIMsport KESSV2 KTAG product PINOUT connection diagram
3.For the PINOUT connection diagram of EVC products, please refer to https://www.evc.de/en/product/bsl/ecu.asp
The L connection point is connected to the Boot connection port on the GODIAG ECU GPT BOOT AD, and the H point is connected to CNF1.
4.For the PINOUT connection diagram of kt-prog or FOX FGtech products, please refer to https://wiring.fg-technology.uk/index.php?m=Home&c=wiring&a=index
The Gray line connection point in the picture is Boot. The CNF1 or 3.3V in the picture is connected to the 1KΩ resistor point, or the resistor is connected as shown in the picture. The brown wiring in the picture is connected to GPT0, and the white wiring in the picture is connected to GPT1.
5.For the PINOUT connection diagram of obdtuning products, please refer to https://wiki.obdtuning.de/index.php/Hauptseite
OBD2 Bench, GPT Bench, Boot
Connect GODIAG ECU GPT BOOT Adapter, J2534 device/ECU Programmer and ECU correctly with the corresponding PINOUT diagram, and then perform ECU read/write, etc operations.