Godiag Full Protocol OBD2 Jumper can replace OBDSTAR P004 adapter jumper kit to reset airbag. Godiagshop.com engineer has successfully tested on Nissan 98820 3TS0A airbag ECU.
Nissan 98820 3TS0A airbag ECU
Connection:
The corresponding wiring diagram can be checked in OBDSTAR P50.
Path: Select Airbag Reset>> Airbag Reset newest version>> Auto Search Part Number>> manually input the part number of ECU>> choose the related airbag ECU model>> Diagram
Connect Godiag tricore cable and ECU correctly depending on the definition
Confirm the ECU terminals are connected correctly
Connect the 120 ohm CAN protocol resistor again
Connect the ECU dedicated regulated power supply
Connect Godiag jumper to P50 airbag reset tool
Turn on the analog ignition switch to check whether the ECU can send CAN protocol communication
Keep OBDSTAR P50 in charging and communication in the whole process. Also ensure the internet connection is normal.
2.Reset airbag
Read ECU information- success
Read out the ECU part number is 98820 3TS0A
Read DTC- success
Read and backup EEPROM data- success
Tap Advanced Function>> Read EEPROM (XC2xxxX)>> Start
Enter a filename to save the EEPROM data read out
Besides, Godiag tricore cable also can work with other airbag reset tool (OBDSTAR X300 DP Plus, CarProg, iProg…) which supports OBD2 or bench mode by dismantling ECU.