GODIAG GT107+ DSG plus gearbox data adapter is a new DSG gearbox connection adapter. It is able to clone, diagnose and repair DSG gearbox ECU, and can also read, write and adjust data for DSG gearbox ECU via PCMFlash, PCMTuner, Kess v2, etc. It’s better than GT107 DSG (Godiag GT105 Plus GT107).
Godiag GT107+ DSG Plus advantages:
It has much more advantages than GT107 DSG as below.
- Support voltage and current display
- No need to work with Godiag GT105 ECU IMMO Prog AD
- Add GND and VCC cables in the DB9 DSG Gearbox Universal Conversion Jumper, which can be used to connect with BMW and Benz gearboxes (GND is negative and VCC is positive)
- Customers can disassemble the connection port and can make their own professional connection port to achieve DIY development.
Check more details in the comparison table:
| Product | GT107 DSG | GT107+ DSG Plus |
| Image |  |
 |
| VAG series DSG gearbox | Yes | Yes |
| Manual power analog ignition switch | Yes | Yes |
| PCMFIash L-Line automatic control | Yes | Yes |
| BOOT cable & boot probe | Yes | Yes |
| CAN H CANL K-line communication indicator | Yes (need Godiag GT105) | Yes |
| 120 ohm CAN resistance switch | Yes | Yes |
| Draw power from the vehicle battery | Yes | Yes |
| Automatic control of power indicator light | Yes | Yes |
| 120 ohm CAN resistance switch indicator | No | Yes |
| Voltage display | No | Yes |
| Current display | No | Yes |
| Support disassembly and connect with wire, convenient for DIYs. Or connect with professional adapter | No | Yes |
| Support other Gearbox ECUs | Less | Add VCC GND cable, support more gearbox ECUs |
How to use GODIAG GT107+ DSG Plus Gearbox Data Adapter?
Connection Diagram:
Easy operation guide:
- Used with PCMtuner ECU programmer:
1.Connect the Godiag GT107+ to the gearbox ECU according to the gearbox ECU wiring definition. For VAG DQ250, DQ200, VL381, VL300, DQ500, DL501, for Renault DC0/DC4, Gen2, for Honda LUK UDCT.
2.Connect the 12V 2A DC power supply. (The function buttons must be popped up before connecting the power supply.)
3.GODIAG GT107 + analog ignition switch is in “automatic” mode if the ignition switch is not pressed, the voltage and current data of the adapter displays 0V 0A, and it is in “manual” mode, if the ignition switch is pressed, the adapter displays the current working voltage of the power supply, and the current working current of gearbox ECU. (Note: please select the “automatic” or “manual” analog ignition mode, according to the mode required by the device for reading and writing data)
4.Connect PCMFlash, PCMTuner, J2534 passthru.
5.Perform data reading and writing operations.
- Used on the Car:
1.According to the wiring definition of Gearbox ECU, connect Godiag GT107+ to the gearbox ECU. For VAG DQ250, DQ200, VL381, VL300, DQ500, DL501, for Renault DC0/DC4, Gen2, for Honda LUK UDCT.
2.Connect the 12V 2A DC power supply. (The function buttons must be popped up before connecting the power supply.)
3.GODIAG GT107 + analog ignition switch is in “automatic” mode if the ignition switch is not pressed, the voltage and current data of the adapter displays 0V 0A, and it is in “manual” mode, if the ignition switch is pressed, the adapter displays the current working voltage of the power supply, and the current working current of gearbox ECU. (Note: please select the “automatic” or “manual” analog ignition mode, according to the mode required by the device for reading and writing data, )
4.Connect PCMFlash, PCMTuner, J2534passthru.
5.Perform data reading and writing operations.
- Used with Kess V2 for DQ200, DQ250, DQ500:
1.Connect the Godiag GT107+ to the gearbox ECU according to the gearbox ECU wiring definition. For VAG DQ250, DQ200, VL381, VL300, DQ500, DL501, for Renault, DC0/DC4, Gen2, for Honda LUK UDCT, Benz, BMW, gearbox ECU.
2.Connect the 12V 2A DC power supply. (The function buttons must be popped up before connecting the power supply.)
3.GODIAG GT107 + analog ignition switch is in “manual” mode if the ignition switch is pressed, the adapter displays the current working voltage of the power supply, and the current working current of gearbox ECU.
4.Connect OBD2 data reading and writing device or diagnostic device.
5.Perform Gearbox ECU data reading, writing or diagnostic operations.
GODIAG GT107+ DSG Plus Gearbox Data Adapter is in pre-sale now.
https://www.godiagshop.com/wholesale/godiag-gt107-plus-dsg-plus-gearbox-data-adapter.html