Godiag GT107 is specially designed to work with Godiag GT105 to clone DSG gearbox. This GODIAG ECU IMMO Kit is compatible with PCMTuner, Kess V2, PCMFlash, KTMBench, etc.
Why do you need a Godiag GT105& GT107 DSG gearbox adapter set?
Because the PCMTuner bench/boot cable cannot be connected with DSG gearbox ECUs’ round connector directly. You may need some modifications (such as reading VL381) shown image below.
But with the Godiag ECU IMMO Kit, you are allowed to connect pcmtuner bench/boot cable with gearbox on bench. Godiag Full Protocol OBD2 Jumper cannot replace it.
GODIAG GT105 is a breakout box to check DSG connection status.
The features:
-A full-protocol ECU connection line for ECU programming power adjustment
-OBD2 independent PIN 4 body GND, PIN5 signal GND for special programming of some modules.
-PIN4 and PIN5 can be switched between short-circuit and non-short-circuit.
-Standard OBD2 independent PIN4, PIN5.
-Pure copper female seat supports repeated insertion and removal and has a long service life.
-Battery clip treated with environmentally-friendly salt spray, with a thickness of 0.5mm.
-The DC car battery cable adopts a 0.75mm² 2-core sheathed cable, which supports DC5.5*2.5/ DC5.5*2.1 interface.
-The DC connector has a resettable 7A fuse.
-DC power interface, dedicated laboratory power connector.
-OBD2 universal jumper of good quality.
GODIAG GT107 is a DSG read/write adapter.
Which DSG Gearbox models are supported?
VAG DSG/CVT
DQ200MQB/G2 (0CW)
DQ250MQB (0D9)
Reading, writing, checksum correction
VL381/DL382 (0AW/0CK)
DL501/G2 (0B5)
DQ200 (0AM)
DQ250E/F (02E)
VL300/V30 (01J/0AN)
Writing, checksum correction
DQ200/MQB/G2 Boot (EEPROM)
DQ250E/F/MQB Boot (EEPROM)
DL501/G2 Boot (EEPROM)
VL381 Boot (EEPROM)
DL382 Boot (EEPROM)
Honda UDCT Boot (Continental TC1782/EEPROM)
Reading, writing
DQ200/MQB/G2 Boot (MICRO)
DQ250E/F/MQB Boot (MICRO)
VL381 Boot (MICRO)
DL501/G2 Boot (MICRO)
DQ500 (0BH/0BT)
VL300/V30 BSL (FLASH)
VL300/V30 BSL (EEPROM)
DQ250C (02E)
DL382 Boot (MICRO)
Honda UDCT Boot (Continental TC1782/MICRO)
Reading, writing, checksum correction
How to connect DSG Gearbox with GT107?
- PINOUT diagram:
- The connection between GODIAG ECU IMMO Kit and PCMTuner (via OBD/bench):
- The connection between GODIAG ECU IMMO Kit and Kess V2:
2022 Newest GODIAG GT105 ECU IMMO Prog AD Plus GT107 DSG Gearbox Data Read/Write Adapter is available at godiagshop.com now.
https://www.godiagshop.com/wholesale/godiag-gt105-plus-gt107-dsg-gearbox-data-adapter.html