GODIAG GT100+ GT100 Pro and GT100 Breakout Box, any difference?

godiagshop.com has launched a new GODIAG auto tool- GODIAG GT100+ GT100 Pro. It adds 3 more functions than GODIAG GT100. It is also available with European, American and British regulations. Check more differences in this post.

GT100+ adds Electronic Current Display on the main menu
GT100+ GT100 Pro

Advantage: You can intuitively see the current display of the ECU by Connecting the ECU module with the Banana interface or the DB25 cable, which can make your work much easier.

2.Protocol supported:
GODIAG GT100+ can support more protocols like CANBUS, K-Line, PWM, VPW+, KWP2000.

CANBUS Protocol communication:
GT100+ Pin 1, 9, 3, 11 12, 13, 8 [corresponding to the yellow banana connector on the machine], these non-standard obd2 protocol interface may display CAN BUS or K-Line communication protocol. GT100 can only display K-Line Pwm Vpw+ KWP 2000 protocol. GT100+ will display CANBUS K-Line Pwm Vpw+ KWP 2000 protocol communication.

GODIAG GT100+ supports all key lost, activates the meter and wakes up the anti-theft module.

(1).For Porsche, VW 4th generation smart key &5th generation card key (models such as: new A6L Touareg A4 Q5 A7)


  • Use GT100 short the banana PIN 16—-PIN 1
  • After the instrument is on, the key matching tool connects to GT100+ female Head for data collection.

Note: Some vehicle instruments are not bright, but data can also be collected, for example: A6L Q7.

(2).Can replace the engine ECU for Toyota and support connect short-circuit PIN13-PIN4 with key programmer when doing all key lost for Toyota.

(3). Mitsubishi all key lost matching or all key lost for remote control key, need to set OBDII short-circuit PIN1-PIN4.

As GODIAG GT100+ GT100 Pro adds more functions and supports more protocols, etc, the price will be 20 dollars more expensive than GT100.

For other functions, the performance guides are the same as GODIAG GT100.

GODIAG GT100 + GT100 Pro:

GODIAG GT100 OBD2 Break Out Box ECU Connector: