How to diagnose SID208 ECU by GODIAG GT100+ OBDII Breakout Box and Autel MK808Z-BT diagnostic scanner? Check the step-by-step guide below.
How to connect?
- Remove the MaxiVCI Mini from the back of Autel MaxiCOM MK808Z-BT
- Connect Godiag GT100+ ECU Connector and Autel MK808Z-BT VCI by the Godiag OBD 2-in-1 extension cable
- Connect Godiag GT100+ and SID208 ECU via the Godiag Colored Jumper Cable according to the corresponding wiring diagram
- Connect Godiag Power Supply 12V to GT100+
The indicator lights on the device will turn on automatically.
How to operate on Autel MK808Z BT tablet?
Select Diagnostics>> EOBD>> Accept the disclaimer>> Autoscan>> Gasoline/petrol
It identifies the vehicle protocol successfully.
Then enter function menu
MK808Z BT supports DTC& FFD, I/M readiness, live data, on-board monitor, component test, vehicle information, and vehicle status.
Select the corresponding option to operate separately, all are ok.
Read DTC& FFD
I/M readiness
View live data
Check vehicle generation information
Check vehicle status
Godiag GT100+ not only can tell whether the car/ECU module, and cable communication is good or not, but also can directly display the Voltage and Current data during the operation. Easy and safe to work with diagnostic tool!
Official GODIAG OBD2 Tool Online Shop