Godiag GT100+ OBDII Breakout Box and Launch X431 V can identify vehicle, read fault code/live data/ I/M readiness/ freeze frame… on ISUZU EDC15M/ Mazda 3 ECU no issues.
1.Diagnose ISUZU EDC15M ECU:
2.Diagnose Mazda 3 ECU:
Connection:
First, remove the VCI from Launch X431 V
Next, use Godiag OBD 2-in-1 extension cable to connect Godiag GT100+ ECU Connector and Launch X431 V VCI
Then, use Godiag Colored Jumper Cable to connect Godiag GT100+ and ECU according to the corresponding wiring diagram
Finally, connect Godiag Power Supply 12V to GT100+
Operation steps:
Turn on X431 V tablet
Select Local diagnose>> EOBD/OBDII
It will search protocol automatically.
Then perform the basic functions supported.
1.Godiag GT100+ and Launch X431 V Diagnose ISUZU EDC15M ECU:
Connection:
Identify vehicle info
Read I/M readiness>> Read status after DTCs cleared
Read live data
Read fault code
2.Godiag GT100+ and Launch X431 V Diagnose Mazda 3 ECU:
Connection:
Identify vehicle info
Read I/M readiness>> Read status after DTCs cleared
Read live data
Read freeze frame
Read fault code
Read vehicle info
Related posts:
- Godiag GT100+ and Launch X431 V Diagnose ME17.9.11 ECU: Success
Godiag GT100+ and Launch X431 V Diagnose ME17.9.11 ECU: Success
- Godiag GT100+ and Launch X431 V Diagnose Different ECUs
- Godiag GT100+ Feedback: Diagnose ECUs with Autel MK808Z-BT No Issues
Godiag GT100+ Feedback: Diagnose ECUs with Autel MK808Z-BT No Issues