How to diagnose 2007 Mitsubishi Outlander by GODIAG GD101 J2534 CABLE and M.U.T-3_SE software?
Download and install GODIAG J2534 Driver and M.U.T-3_SE software correctly, and connect GODIAG cable to the vehicle and computer, and then run M.U.T-3_SE software to perform diagnosis function.
1.Free download GODIAG J2534 Driver V2.3
https://mega.nz/file/9csFybqb#SFqJjf4WQydz3Q3CrsctirxmUzL2F9D0E9X7lE7FowM
2.Free Download M.U.T-3_SE software
https://mega.nz/file/drEn3BiL#v2qK8z3Y9fTNFNaHFGq_Wb44jT_fE2ES4Kz2uBUZ96A
3.Install GODIAG J2534 Driver
Run GODIAG J2534 V2.3 program on the desktop
Select language, destination location, components, start menu folder, and additional tasks
Start to install
Installation is completed
4.Connect GODIAG J2534 Passthru cable to the vehicle and computer
5.Launch J1979 diagnostic tool v2.3, click “Connect” to connect GODIAG GD101 J2534 and vehicle
6.Then open M.U.T-III_SE software to operate
Select STV, and confirm if the V.C.I is used
It will show the system list, vehicle info (incl. Chassis No/VIN), etc.
Click the clear icon to reset all info, read chassis No/VIN and reprogram ECU again
The vehicle info is the same as before.
Then we can perform check chart for problem symptoms, self-diagnosis, view data list, etc.
For example, click “Self diagnosis”, there are 10 DTC’s found, it also can active DTC.
Click “Dada List”, and you can see the related info.
Video guide: