Godiag GT107+ DSG Plus Gearbox Data Adapter can work with Kess V2 to read and write VAG DQ200, DQ250, VL381, VL300, DQ500, DL501, Renault DC0/DC4, Gen2, Honda LUK UDCT, Benz, and BMW gearbox ECU on bench. It needs to set GT107 + analog ignition switch in “manual” mode. Here takes DQ200 0AM as a demonstration.
How to connect Godiag GT107+, KessV2, and gearbox ECU?
1.Connect the GT107+ Adapter to the gearbox ECU according to the gearbox ECU wiring definition. VAG DQ200 (0AM, 0CW), DQ250 (02E, 0D9), VL381 (0AW), DQ500 (0BT, 0BH)
2.Connect the 12V 2A DC power supply to GT107+.
(The function buttons must be popped up before connecting the power supply.)
3.Press GODIAG GT107+ analog ignition switch, and it is in “manual” mode. The adapter displays the current working voltage of the power supply, and the current working current of gearbox ECU.
4.Connect Godiag GT107+ DSG Plus adapter and Kess V2 ECU programmer via the KessV2 OBD cable
5.Connect Kess V2 and computer via the USB cable
How to read/write gearbox ECU with Godiag GT107+ and KessV2?
Run Kess V2 Ksuite V2.80 software
Click the corresponding function to perform Gearbox ECU data reading or writing.