OBDSTAR DC706 Clone Volkswagen SIMOS18.10 ECM by Boot

Confirmed! OBDSTAR DC706 with ECM V30.54 read and write INT Flash and INT EEPROM to Volkswagen Continental SIMOS18.10 TC1791 ECM by boot perfectly.

 

Requirements:

Update the ECM software to V30.54 or above

Connect DC706 with an available WiFi

 

Accessories required:

Main cable

OBDSTAR P004 ECU Clone Jumper

OBDSTAR MP001 Programmer

OBDSTAR C4-01 and W005

obdstar dc706 clone vw simos18.10 1

Menu function path:

Select ECU Flasher>> All>> ECM>> ECMV30.54>> imos18.10>> VOLKSWAGEN CONTINENTAL SIMOS18.10 TC1791

obdstar dc706 clone vw simos18.10 2obdstar dc706 clone vw simos18.10 3

Boot connection diagram:

obdstar dc706 clone vw simos18.10 4

PINOUT wiring diagram:

obdstar dc706 clone vw simos18.10 5

Follow the diagrams to connect DC706 and ECU correctly using the related accessories, and supply power to DC706 as well

obdstar dc706 clone vw simos18.10 6

Operation:

After connection, click “Start”, select “BOOT” and “MP001” options

obdstar dc706 clone vw simos18.10 7

Make sure MP001 Programmer with DC706 ECU tool connection is normal

Connect ECU successfully

obdstar dc706 clone vw simos18.10 8

Read and save the original INT flash and INT eeprom (TC1791) data- OK

obdstar dc706 clone vw simos18.10 9 obdstar dc706 clone vw simos18.10 10

Connect OBDSTAR DC706 ECU Tool to a new SIMOS18.10 ECM

Read and save the new INT flash and INT eeprom (TC1791) data- OK

Write the corresponding INT flash and INT eeprom data of original ECM into the new one- OK

Click “Disconnect”

obdstar dc706 clone vw simos18.10 11 obdstar dc706 clone vw simos18.10 12 obdstar dc706 clone vw simos18.10 13

Done!

Official GODIAG OBD2 Tool Online Shop