Godiag GT107 and GT105 Read VAG DQ200/DQ250 with KESS V2/PCMTuner/ Tactrix Openport 2.0

GODIAG GT107 ECU IMMO Kit can work with PCMTuner, Kess V2, PCMFlash, KTMBench, Tactrix Openport 2.0 to clone, diagnose and repair DQ250, DQ200, VL381, VL300, DQ500, and DL501 DSG Gearbox ECU. In this post, we will highlight the test reports on DQ250/DQ200.

 

1.Godiag GT107+ GT105+ Kess V2

  • Read DQ250 Data (with subtitles)

 

  • Read DQ200 data

 

Main operation steps:

Step 1: Connect Godiag GT107, GT105, KESS V2 ECU programmer, DQ250/ DQ200 ECU and computer correctly

godiag gt107 read vag dq200dq250 dsg 1

godiag gt107 read vag dq200dq250 dsg 2

Step 2: Identify and read ECU info by Ksuite 2.80 software

godiag gt107 read vag dq200dq250 dsg 3

Check more details: Use Godiag GT107 Gearbox Adapter and Kess V2 to Read DQ200/DQ250 Data

 

2.Godiag GT107+ GT105+ PCMTuner

  • Read DQ250 (02E) gearbox

Read DQ200 OAM DSG gearbox (with subtitles)

Main operation steps:

Step 1: Connect all devices

Connect PCMTuner ECU programmer and Godiag GT105 via the OBD cable

Connect GT105 and GT107

Connect PCMTuner and computer via the USB cable

Connect the color jumper of Godiag GT107 to DQ250/DQ200 ECU according to the corresponding wiring diagram

Plug the GT105 to the power

Plug the PCMTuner Dongle into the computer

Press down the ‘Auto’ button of GT107

godiag gt107 read vag dq200dq250 dsg 4

godiag gt107 read vag dq200dq250 dsg 5

 

Step 2: Identify and read ECU data

Open pcmflash software to start the diagnosis

Select the corresponding ECU model

First, click identification to detect the ECU info

Next, read the data, press the button of GT107

Save the data after reading

godiag gt107 read vag dq200dq250 dsg 6

godiag gt107 read vag dq200dq250 dsg 7

3.Godiag GT107 Plus GT105+ PCMTuner Dongle+ Tactrix Openport 2.0

  • Read VW DQ250 gearbox

 

Connect Godiag GT105 and GT107

Connect GT105 and Tactrix Openport 2.0

Connect GT107 and gearbox

Connect GT105 to power

Connect Tactrix Openport 2.0 USB cable and PCMTuner Dongle

godiag gt107 read vag dq200dq250 dsg 8

Note: this VW DSG DQ250 gearbox is CAN protocol, you need to press the 120 ohm button.

godiag gt107 read vag dq200dq250 dsg 9

Install Openport 2.0 J2534 Drivers Setup

Run pcmflash 1.2.0 software to identify and read DQ250 data

Interface select J2534: Tactrix Inc.- OperPort 2.0 J2534 ISO/CAN/VPW/PWM

ECU module:

58 VAG: DQ250E/F/MQB Boot (EEPROM),

58 VAG: DQ250E/F/MQB Boot (MICRO)

godiag gt107 read vag dq200dq250 dsg 10

godiag gt107 read vag dq200dq250 dsg 11

 

Alright, the test results show that VAG DQ250, DQ200 DSG Gearbox can be read by Godiag ECU IMMO Kit and KESS V2/PCMTuner/ Tactrix Openport 2.0 perfectly.

 

Best price to get Godiag GT105 Plus GT107 ECU IMMO Kit at godiagshop.com (ANNI SALE price: only US$56.00 free shipping):

https://www.godiagshop.com/wholesale/godiag-gt105-plus-gt107-dsg-gearbox-data-adapter.html

www.godiagshop.com