In our work, when we go out to rescue, we often need to use 12V external power supply to provide support for machinery and equipment, or some vehicles have no power at the OBD port and need an external 12V power supply to supply power normally. Is there a tool that can help us solve this problem?
There are also some vehicles that need to short-circuit the OBD terminals when matching the remote control or forced communication or synchronization. For example, some Volkswagen Audi keys need to be forced to be powered, and they need to short-circuit 1-16 of the OBD. The PIN is grounded, Toyota synchronous anti-theft needs to short the PIN4 and PIN13 of the OBD for 45 minutes, and some vehicles need to short the PIN4-5 when diagnosing. However, for ordinary locksmiths and novices, it is possible to find the corresponding PINs and connect the wrong wires, so is there such a small device that can solve this demand?
Yes! Godiag GT105 ECU IMMO Prog AD can solve this problem.
With its unique Power cord with battery clip, you can perfectly do the following things.
1. Provide power support for Xhorse Panda Key Cutting Machine
2. Connect the vehicle battery to provide external 12V power support for the programmer
3. It also can be used instead of the Ford All Key Lost Cable
Besides, you can short-circuit via OBD according to your own needs without wiring, just plug in the plug button. The GT105 OBDII ECU Connector can also detect the communication status of the OBD port. When the vehicle does not communicate, it can be used to detect whether there is problem with the vehicle or the equipment.
Moreover, GODIAG GT105 is cheaper less than $50, and also powerful and convenient for our work.
GODIAG GT105 IMMO Prog AD OBD II Break Out Box ECU Connector: