Now Godiag GD101 J2534 Passthru Cable with the newest driver V2.2 can work in Renault Clip. It’s the same as VNCI J2534 Nano.
It’s also suitable for VNCI J2534 Nano driver. Which comes with major fixes and the firmware can be updated to Version 1.8.
GODIAG GD101 J2534 is compatible with J2534 Passthru and ELM327.
GODIAG GD101 J2534 has a similar functionality as Tactrix Openport 2.0.
Support most of all of J2534 compatible software (HDS, TIS, ODIS, JLR SDD, PCMFLash…).
Support most of all of ELM327 software (ELMConfig, Forscan, ScanMaster…).
How to set up Renault Clip software for Godiag/VNCI J2534?
It can be used on virtual machines, and it is recommended to use Win10. Before use, you need to change the registry.
The simplest method is to set “Vendor”=”79B” and “Name”=”1B” on your passthru registry settings in HKEY_LOCAL_MACHINE\SOFTWARE\PassThruSupport.04.04\<VCI>.
Recommend to create a new VCI entry by exporting from the registry and editing the reg file.
With the newest firmware inside the both the probes, configure in Windows registry entries regarding the Name and the Vendor to 1B and 79B, respectively, to simulate the Alliance VI probe towards the Renault Clip software.
The program works with clip but all depends on the driver used on install.
If you used GODIAG then you have a registry key, if you used VNCI then it is another.
Both drivers are the same, the only difference it is the install location, the logo used and the name of the main DLL file.
To be 100% accurate, the same dll it is named different from one to another.
So, here you have both registry done for both versions of drivers for x86 and x64 and also latest version of the drivers at day, version 2.2 for both VNCI and GODIAG J2534 along with Windows 7-8.1 Drivers (x86 and x64)
- VNCI Nano and GoDiag GD101 J2534 Drivers v2.2
- VNCI Nano and GoDiag GD101 – Windows 7 and 8.1 Drivers
- Can Clip Registry Files for x86 and x64
Click here to download.