Use GODIAG GT100+ OBDII Breakout Box to work with Launch X431 V 8inch Tablet to diagnose ME 17.9.11 TC1762 ECU, works perfectly!
Connection:
First, remove the VCI from Launch X431 V
Next, use Godiag OBD 2-in-1 extension cable to connect Godiag GT100+ ECU Connector and Launch X431 V VCI
Then, use Godiag Colored Jumper Cable to connect Godiag GT100+ and ME 17.9.11 ECU according to the corresponding wiring diagram
Finally, connect Godiag Power Supply 12V to GT100+
Operation steps:
Turn on X431 V tablet
Select Local diagnose>> EOBD/OBDII
It will search protocol automatically.
Then perform the basic functions supported.
Read I/M readiness>> Read status after DTCs cleared
Read live data
Read freeze frame
Read fault code
Read vehicle info
…
Godiag GT100+ also can diagnose ME17.9.11 ECU with Autel MK808Z-BT: