It has been tested and confirmed by godiagshop.com engineer that Godiag GD101 J2534 Cable diagnoses Honda with Honda HDS newest software 3.105.012 successfully. The vehicle tested is the 2009 Ballade.
Before the operation, download and install Honda HDS software and Godiag J2534 Driver.
As HDS comes with 3.102 version software in default, it needs to install both HDS 3.102 and 3.105 on the same PC.
PART I
Free download HDS Honda 3.105.012
Free download Godiag GD101 J2534 driver- J1979 Diagnostic Tool V2.2
Compatible operating system:
Windows 8/10/11, 32/64bit (Win 10 Pro is recommended)
PART II
Install Honda HDS 3.105 software and Godiag GD101 J2534 Driver
1.Install Honda HDS 3.105 software
Step 1: Install HDS 3.102 setup
Extract both HDS 3.102.051 and 3.105.012 zip files
Open HDS 3.102.051 folder and click “Setup” to install
Press Next
Accept license agreement
Select region: USA
Download and install .NET Framework 3.5
Finish installing HDS setup.
Step 2: Install HDS 3.105 setup
Run HDS 3.105 folder
Install HDS setup
Step 3: Run HDS_Fix crack
2.Install Godiag J2534 Driver
After downloading, select the setup language, and follow the prompts to install the driver.
After installation, go to Computer Management>> Device Manager>> Ports (COM& LPT), it has a USB Serial Device port, that means Godiag J2534 driver is installed successfully.
Run J1979 diagnostic tool program, click “Connect” to enable communication with vehicle
PART III
Diagnose Honda with Godiag J2534 Cable and Honda HDS 3.105
Connect Godiag J2534 USB cable, vehicle, and computer properly
Run Honda Diagnostic System software on the desktop
Click “F12” Set up button at the top of the page and select GODIAG- J2534 as Comms Interface
Enter odometer and R.O.number to identify vehicle
Select Honda Systems>> PGM FI>> Data List
The full list displays on the screen.
Alright! That’s the whole process to diagnose Honda cars by Godiag GD101 J2534 Passthru Cable and Honda HDS 3.105.012.