GODIAG GT100+ OBDII Breakout Box and Autel MK808Z-BT diagnostic scanner successfully diagnosed ME17.9.11 ECU.
1.Connection:
- Remove the MaxiVCI Mini from the back of Autel MaxiCOM MK808Z-BT
- Connect Godiag GT100+ ECU Connector and Autel MK808Z-BT VCI by the Godiag OBD 2-in-1 extension cable
- Connect Godiag GT100+ and ME17.9.11 ECU via the Godiag Colored Jumper Cable according to the corresponding wiring diagram (ME17.9.11 TC1762)
- Connect Godiag Power Supply 12V to GT100+
2.Operate on Autel MK808Z BT tablet:
Select Diagnostics>> EOBD>> Accept the disclaimer>> Autoscan
Read the vehicle CAN protocol successfully.
Then enter function menu
The following functions are supported by MK808Z BT:
DTC& FFD, I/M readiness, Live data, On-board monitor, Component test, Vehicle information, and Vehicle status
Read trouble codes- OK
I/M readiness- OK
View live data- OK
Check vehicle generation information- OK
Check vehicle status- OK
Learn more test reports of Godiag GT100+ OBD2 Breakout Box, please follow http://blog.godiagshop.com/.